Skip to content
WW2 Information

Searchsoon

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data (1941), p. 107

Page 107 of 363 in FM 101-10

Transcription

45 TROOP MOVEMENTS (16) Minimum Requirements for Securing 155 mm Gun M-l —8" Howitzer Carriage.—Flat Cars. See Fig. 12. Item No. of PCS. Description. A Brake wheel clearance. See Fig. 6. B 8 6 in. x 8 in. x 24 in. blocks, (pattern 3). Hieght at point of contact with tire must be not less than 4 in. from car floor. Nail heel of block to car floor with three 40-D nails and toe-nail that portion under tire to car floor with two 40-D nails before Items "C" are applied. C 12 2 in. x 4 in. x 36 in. cleats, (pattern 2). Nail lower piece to car flotxr with three 40-D nails and top piece to one below with three 40-D nails. D 2 2 in. x 4 in. x 36 in. cleats, (pattern 2). Place side by each side. side, lengthwise of car and nail each to car floor with three 40-D nails. Lower carriage to rest on Items "D" enough to partially relieve weight on. tires. E As required. Fill space under front end of gun carriage with 2 in. x 4 in. x 36 in. pieces, (pattern 2). Wedge tight and secure to prevent displacement. F 2 Brace, (pattern 7), length *4 in. longer than the dist ance between axle of limber and car floor. Place be tween car floor and axle to partially relieve weight on tires. Nail each to car floor with six: 40-D nails. G 16 strands, 3 wrappings, No. 8 Ga. black annealed wire. Loop around and over top of rear end of gun trail and secure to opposite stake pockets. Twist tie with rod or bolt on both sides of trail. Brakes must be applied. See General Rules for further details. 102

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 107. Only this page is downloaded. Open the full PDF

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data, PDF page 107

100%

Data on this page

7 data points

AttributeValue
Securing 155 mm gun/8-inch howitzer carriage on flat cars, Item B blocks
pieces required8 pieces“B 8 6 in. x 8 in. x 24 in. blocks, (pattern 3)”
Securing 155 mm gun/8-inch howitzer carriage on flat cars, block height at tire contact
min height4 in“point of contact with tire must be not less than 4 in.”
Securing 155 mm gun/8-inch howitzer carriage on flat cars, Item C cleats
pieces required12 pieces“C 12 2 in. x 4 in. x 36 in. cleats, (pattern 2)”
Securing 155 mm gun/8-inch howitzer carriage on flat cars, Item D cleats
pieces required2 pieces“D 2 2 in. x 4 in. x 36 in. cleats, (pattern 2)”
Securing 155 mm gun/8-inch howitzer carriage on flat cars, Item E packing pieces
size2 in. x 4 in. x 36 in.“x 4 in. x 36 in. pieces, (pattern 2)”
Securing 155 mm gun/8-inch howitzer carriage on flat cars, Item F braces
pieces required2 pieces“F 2 Brace, (pattern 7), length *4 in. longer”
Securing 155 mm gun/8-inch howitzer carriage on flat cars, Item G lashing wire
number of strands16 strands“G 16 strands, 3 wrappings, No. 8 Ga. black annealed wire.”

Extracted from this page by machine. Each row quotes the text it came from; check it against the scan.