Transcription
45 TROOP MOVEMENTS
(18) Minimum Requirement for Securing 37 mm Anti^Aircraft Gun.
—Flat, or Drop End Gondola Cars. See Fig. 14.
Item No. of Pas. , Description.
A Brake wheel clearance. See Fig. 6.
B 8 6 in. x 8 in, x 24 in. blocks, (pattern 3). Height at
point of contact with tire must be not less than 4 in.
from car floor. Nail heel of block to car floor with
three 40-D nails and toe-nail that portion under tire
to car floor with two 40-D nails before Items "C" are
applied.
C 8 2 in. x 4 in. x S6 in. cleats, (pattern 2). Nail lower
piece to car floor with three 40-D nails and top piece
to the one below with three 40-D nails.
D VACANT.
E VACANT.
F 4 Brace, (pattern 7), length % in. longer than the
distance between axle and car floor. Place between
car floor and axle to partially relieve weight on tires.
Nail each to car floor with six 40-D nails.
G 44 strands, 2 wrappings, No. 8 Ga. black annealed
wire. Place through holes in wheels, which must be
the same distance from car floor, secure to stake
pockes and tighten only enough to remove slack.
Brakes must be applied. See General Rules for further details.
106
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.