Transcription
45 TROOP MOVEMENTS
Item
A
B
(19) Minimum Requirements for Securing One or More, Two Wheel
Motorcycles.—Flat, or Drop End Gondola Cars. See Fig. 15.
No. of Pas. Description.
Brake wheel clearance. See Fig. 6.
1 Cradle, (pattern 5). Nail to car floor with six 20-D
each wheel nails.
2 WHEN TWO OR MORE MACHINES ARE LOADED
SIDE BY SIDE, PER SKETCH 1.
2 in. x 4 in., long enough to extend 8 in. beyond the
two outside vehicle frames. Secure to frame of each
machine with sufficient wire to prevent displacement.
Wires used for this purpose must be secured to Items
"C" with sufficient 20-D nails to prevent displace
ment.
2 WHEN TWO OR MORE MACHINES ARE LOADED
SIDE BY SIDE, PER SKETCH 1.
2 strands, 1 wrapping, No. 8 Ga. black annealed wire.
Place under and over Items "C", at each vehicle and
attach to nearest stake pocket at each side of car.
Twist tie at each side with rod or bolt.
1 WHEN MACHINES ARE LOADED SINGLY, PER
each side SKETCH 2.
of machine. Brace, 2 in. x 4 in., length to suit. Nail one end to
car floor with three 20-D nails and securely wire the
top end to machine frame in rear of seat post. Not
required when two or more machines are loaded side
by side.
1 WHEN MACHINES ARE LOADED SINGLY, PER
each machine. SKETCH 2.
4 strands, 2 wrappings, No. 8 Ga. black annealed wire.
Loop around web of frame just in rear of handle
bars and attach to nearest stake pocket at each side of
car.Twist tie at each side with rod or bolt. Not re
quired when two or more machines are loaded side
by side.
Brakes must be applied.
See General Rules for further details.
D
E
108
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.