Transcription
45 TROOP MOVEMENTS
(20) Minimum Requirements for Securing One or More, Three Wheel
Motorcycles.—Flat, or Drop End Gondola Cars. See Fig. 16.
Item No. of PCS. Description.
A Brake wheel clearance. See Fig. (5.
B 1 Cradle, (pattern 5). Nail to car floor with six 20-D each wheel nails.
C 2 WHEN TWO OR MORE MACHINES ARE LOADEDSIDE BY SIDE, PER SKETCH 1. 2 in. x 4 in., long enough to extend 8 in. beyond the two vehicles frames. Secure to frame of each machine with sufficient wire to prevent displacement. Wires used for this purpose must be secured to Items "C" with sufficient 20-D nails to prevent displacement.
D 2 WHEN TWO OR MORE MACHINES ARE LOADEDSIDE BY SIDE, PER SKETCH 1. 4 strands, 2 wrappings, No. 8 Ga. black annealed wire. Place under and over Items "C", at each vehicle and attach to nearest stake pocket at each side of car. Twist tie at each side with rod or bolt.
E 1 WHEN MACHINES ARE LOADED SINGLY, PER each side of SKETCH 2.machine Brace, 2 in. x 4 in., length to suit. Nail one end to car floor with three 20-D nails and securely wire the top end to machine frame in rear of seat post. Not required when two or more machines are, loaded side by side.
p 1 WHEN MACHINES ARE LOADED SINGLY, PER each machine SKETCH 2.
4 strands, 2 wrappings, No. 8 Ga. black annealed wire. Loop around web of frame just in rear of handle bars ' and attach to nearest stake pocket at each side of car. Twist tie at each side with rod or bolt. Not re-
Taired when two or more machines are loaded side y side.
Brakes must be applied.See General Rules for further details.
110
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.