Skip to content
WW2 Information

Searchsoon

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data (1941), p. 172

Page 172 of 363 in FM 101-10

Transcription

SUPPLY 85-86 To determine the predicted expenditure of gasoline in the operation of the large units shown in graphs in paragraph 87 it is only necessary to compute the number of unit miles of travel involved and the amount of gasoline in gallons may be read directly from the graph (Fig. 28, par. 87). To determine the number of unit miles of travel (UM) the following for mula is used: UM = MD + .4 SD (1) -f V Example: Infantry Division (Triangular) Movement (MD) =20 miles of travel Supply Distance (SD) (1) average one-way =50 miles of travel Variable (V) (average conditions) =10 miles of travel UM = 20 + (.4x50) +10 UM = 50 Fifty unit miles of travel for a triangular division, under the con ditions stated, amounts to 8600 gallons (fifty on the vertical scale of the chart is equivalent to 8600 gallons on the horizontal scale. (1) Approximately two-tenths of the vehicles of a division function as supply ve hicles. If the average one way distance to supply points is multiplied by four-tenths, the result is the same as multiplying the average round trip distance by two-tenths. • 86. PRESCRIBED LOADS OF CLASS III SUPPLY.—A reserve of gasoline and oil in containers is carried in each unit. As far as practicable, initial distribution of this reserve will be made to each motor vehicle. Each vehicle sent to any army supply point replenishes its supply at some con venient gasoline supply point established by army at or en route to the army supply point. Vehicles remaining in the forward areas are resupplied by exchanging empty containers for full ones brought forward from gasoline and oil supply points by regimental or division transportation. 167

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 172. Only this page is downloaded. Open the full PDF

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data, PDF page 172

100%

Data on this page

6 data points

AttributeValue
Example infantry division (triangular)
movement distance MD20 miles of travel“for mula is used: UM = MD + .4 SD (1) -f V Example: Infantry Division (Triangular) Movement (MD) =20 miles of travel Supply Distance (SD) (1) average one-way =50 miles of travel Variable (V) (average”
average one-way supply distance SD50 miles of travel“Division (Triangular) Movement (MD) =20 miles of travel Supply Distance (SD) (1) average one-way =50 miles of travel Variable (V) (average conditions) =10 miles of travel UM = 20 + (.4x50) +10 UM = 50”
variables V10 miles of travel“of travel Supply Distance (SD) (1) average one-way =50 miles of travel Variable (V) (average conditions) =10 miles of travel UM = 20 + (.4x50) +10 UM = 50 Fifty unit miles of travel for a triangular division,”
unit miles of travel UM50 unit miles“of travel Variable (V) (average conditions) =10 miles of travel UM = 20 + (.4x50) +10 UM = 50 Fifty unit miles of travel for a triangular division, under the con ditions stated,”
Example infantry division at 50 unit miles
gasoline consumed8600 gallons“= 50 Fifty unit miles of travel for a triangular division, under the con ditions stated, amounts to 8600 gallons (fifty on the vertical scale of the chart is equivalent to 8600 gallons on the”
Gasoline unit-mile formula
supply distance weighting factor.4 multiplier“To determine the number of unit miles of travel (UM) the following for mula is used: UM = MD + .4 SD (1) -f V Example: Infantry Division (Triangular) Movement (MD) =20 miles of travel”

Extracted from this page by machine. Each row quotes the text it came from; check it against the scan.