Skip to content
WW2 Information

Searchsoon

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data (1941), p. 185

Page 185 of 363 in FM 101-10

Transcription

100-101-102-103 SUPPLY Under normal conditions allowable speed to be used should conform to the data contained on caution plates. The normal load of the vehicle should conform to its rated tonnage capacity. However, in the computation of loads the rated tonnage capacity will be considered as in addition to the weight of the driver and assistant driver (200 Ibs. each). B 101. LABOR.—a. For planning purposes labor requirements for handling supplies are computed on the average of V^-ton per man per hour for ten hours each day. b. The maximum number of men that can be employed advantageously in loading or unloading one freight car is eleven (one foreman and ten laborers). c. In the field or at a depot, trucks can be loaded or unloaded at the rate of 20 minutes per truck regardless of tonnage if sufficient labor is available. The number of trucks that can be loaded or unloaded simultaneously is de pendent upon the amount of labor available and the conditions existing at the loading or unloading point. SECTION II INFANTRY DIVISION (SQUARE) • 102. METHODS OP SUPPLY.—In the infantry division (square) the gen eral methods of supply are: a. Supply of regiments and separate units by the division services employing transportation under division control. This method of supply frequently requires transfer of loads and the maximum amount of labor and transportation. It is used when army supply points, because of dis tance or bad roads, are not readily accessible to unit trains. This method is called unit distribution. b. Regiments and separate units draw supplies directly from army supply points using regimental and separate unit transportation. This method of supply does not require transfer of loads between trucks, saves time, and reduces labor requirements to a minimum. This method of supply is used when army supply points are readily accessible to unit trains. This is known as railhead distribution. c. Supply by a combination of the above methods as directed by the division commander based on the peculiarities of the situation and the con dition and availability of transport in the several units of the division. • 103. PROCUREMENT OP SUPPLIES.—In the field, supplies are obtained in the division: a. Automatically. 6. By daily telegram. 180

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 185. Only this page is downloaded. Open the full PDF

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data, PDF page 185

100%

Data on this page

2 data points

AttributeValue
Labor handling supplies planning rate
labor duration20 minutes per truck“of 20 minutes per truck regardless of tonnage if sufficient labor is available.”
Driver and assistant driver weight for load computation
weight each200 lb“weight of the driver and assistant driver (200 Ibs. each).”

Extracted from this page by machine. Each row quotes the text it came from; check it against the scan.