Skip to content
WW2 Information

Searchsoon

German Infantry Weapons (Special Series) (1943), p. 139

Page 139 of 203 in German Infantry Weapons (Special Series)

Transcription

GE'RMAN LNFANTRY WEAPONS ward again; then turn the breech-mechanism lever in a clockwise direction. The breech will then be held in the open position by the extractors. To load the gun, insert a round smartly. The round will then release the extractors, and the breech will close automatically. To fire the gun, press the push button in the middle of the elevating handwheel (fig. 67). If this fails, pull the firing lever backward or lift the plunger. A semi-automatic action operates when the plunger in the center of the front end of the spring case is Spring case r Breech-mechanism lever Extractor-releasing lever Firing sha Breech- Firing plunger Safe-and-fire lever Breech ring Figure 66.-Breech of 5-cm Pak. (The spring assembly for the breech-mechanism lever consists of the spring case, which is in two parts (the front with the piston retaining cap and the rear with the piston, piston catch, and pawl), the rack-spindle retaining catch, the rack spindle, the semi-automatic and hand plunger, and the inner and outer springs. When set for hand operation, the piston catch is rotated inwards and the carriage lever does not engage it. The piston head then has the word EIN ("in") showing upwards.) 126

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 139. Only this page is downloaded. Open the full PDF

German Infantry Weapons (Special Series), PDF page 139

100%

Data on this page

1 data points

AttributeValue
5-cm Pak 38 spring assembly
parts of spring casetwo“which is in two parts”

Extracted from this page by machine. Each row quotes the text it came from; check it against the scan.