Transcription
GERMAIN~ INTANTRY WEAPON'S
spring and collar. Depress the retaining plunger of
the safe-and-fire lever and remove the latter. Hold
the breech open and remove the extractor, together
with the extractor retaining catches. After taking
out the taper pin, rotate the breech-mechanism lever to
the fully open position and remove. Operate the actu-
ating shaft until it disengages the actuating slide,
which can then be removed. If necessary, the barrel
can now be lifted out.
(b) Recoil and recuperator system.-The recoil sys-
tem is carried in the cradle, the recoil cylinder on the
left and the hydropneumatic recuperator on the right.
The hydropneumatic cylinder is placed above the
liquid cylinder. A communicating channel connects
the cylinders and a valve is fitted to regulate the flow.
The liquid cylinder has a piston and packing, and the
rear end of the piston rod is secured to the breechblock
lug. A spring-loaded valve is fitted to the front of
the hydropneumatic cylinder. The recoil cylinder,
with piston control rod with sliding valve, is closed by
a stuffing box and gland at the front. The rear end
has a nut to secure the cylinder to the breechblock lug.
(2) Assembly.-Assemble the breech mechanism by
first placing the actuating slide in its groove in the bar-
rel; then insert the actuating link in the slipper and
engage it with the slide. Replace the breech-mecha-
nism lever and taper pin. Open the barrel until the
extractor and the extractor retaining catches can be
placed in position. Insert the safe-and-fire plunger,
and spring; pass the safe-and-fire shaft in fronm the
146
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.