Transcription
PISTOLS, RIFLES, AND GRENADES
f. Maintenance
(1) Oiling and cleaning.-This pistol requires the
same type of care as the U. S. M1911 Colt .45 auto-
matic. The cleaning and oiling is done in a similar
manner. However, in desert countries, or in other
places where dust is prevalent, oil should be used spar-
ingly or not at all.
(2) Stripping.-In order to disassemble the weapon,
it is necessary to remove the magazine and empty the
chamber as indicated in d (3), page 7, above. Press
the muzzle against a clean, hard surface until the barrel
has moved to the rear about a half inch. Then push
the knurled section of the cover-plate latch down-
ward and remove the cover plate. Turn the pistol
upside down and slide the barrel and receiver forward
and separate them. Punch out the rear pivot pin
and remove the breechblock from the receiver. This
amount of disassembly is sufficient for purposes of
cleaning and oiling the pistol.
(3) Assembly.-To reassemble the parts of the weap-
on, first put the breechblock and receiver together
and replace the pivot pin. Slide the barrel and receiver
back onto the frame, making sure that the hook-shaped
link engages in the claws of the recoil-spring head.
Push the barrel backward, using a piece of wood
against the muzzle, and replace the cover plate. Turn
the cover-plate latch until it catches in its locked
position.
9
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.