Transcription
PISTOLS, RIFLES, AND GRENADES
(2) To load and fire.-Press the thumb catch above
the pistol grip in order to release the skeleton shoulder
stock from its folded position. Snap the shoulder stock
into extended position and unfold the butt plate. Pull
the operating handle back and switch it into the safety
notch. Insert a loaded magazine into the feedway on
the under side of the receiver until the magazine catch
engages. Disengage the operating handle from the
safety notch; then aim,7 and squeeze the trigger. The
magazine can serve as a grip while firing (but see fig.
9 for the German method of firing).
(3) To unload.-Press the magazine catch and re-
move the magazine. Check the chamber to be sure
that it is empty. After pressing the trigger, let the
operating handle go forward slowly.
e. Ammunition
The ammunition used in these guns is the standard
9-mm Parabellum cartridge, used in all German pistols
and submachine guns. This is a rimless, straight-case
cartridge with a round-nose, jacketed bullet. The
German nomenclature for this ammunition is Pistol-
enpatronen 08 ("pistol cartridges 08"). It comes in
cases containing 4,160 rounds, packed in multiples of
16 rounds in cartons and packages. Ammunition
(9-mm) manufactured for the British Sten subma-
chine gun (called a machine carbine by the British)
can be used in the M.P. 38 and M.P. 40, Italian
9-mm pistol ammunition other than model 34 will also
'See fig. r, p. 8, above, for the method of aligning German sights.
19
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.