Transcription
PISTOLS, RIFLES, AND GRENADES 39
breechblock from the receiver by pulling downward on
the pistol grip. Disengage the breechblock from the
trigger pistol-grip by sliding the breech out along
the grooves in its sides. The breechblock can be
stripped by pressing on the spring-loaded button and
sliding the plate upward. Removing. the two pins
Front sighM
Reor sight n gr
AmmunFAon holder r
Pivot point
Breechblocl
Safety laver h m
Adjusting screw o
Bipod mount
Pistol-grLp plvot pin
Trigger pistol-4rip qroup
Figure 24.-Close-up of breech of Pz.B. 39.
from the side of the breechblock will release the trig-
ger bar and hammer.
(3) Assembly.-Reverse the stripping procedure
given in (2), on the opposite page. Be sure that the
safety is on "fire" position so that the'breechblock can
be replaced in its slots in the receiver walls.
g. Accessories
The accessories for these guns are a carrying sling
and two ammunition holders that clip on the wooden
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.