Transcription
PISTOLS, RIFLES, AND GRENADES
b. Characteristics
(1) General.-This grenade consists of a thin iron
or steel casing, or head, containing the explosive filler
and screwed onto a hollow wooden handle, through the
center of which runs a double length of cord (see fig.
25). This cord is attached at one end to a lead ball
which is part of the friction-igniter-detonator system,
and at the other end of a procelain ball. The cavity
in which the porcelain ball rests is closed 'by a metal
cap that screws on. Inside the cap is a spring-actu-
ated metal disk that prevents movement of the porce-
lain ball.
(2) Table of characteristics.-
Over-all length ------- - - --__--_ 1 foot 2 inches.
WVeight 1_----------------------------- 1 pound 5 ounces.
Weight of explosive filler -------------- 6 ounces.
Time of delay fuze _----------_ 4 to 5 seconds.
Effective blast radius -_-_----_--_---- _ 12 to 14 yards.
c. How to Operate
(1) Safety.-(a) The detonator is not assembled to
the grenade until it is carried into combat.
(b) The metal cap on the end of the handle holds
the porcelain ball in place and is not removed until
the grenade is to be thrown.
(2) To arm and throw.-(a) To arm grenade.-
The wooden handle is unscrewed from the head, and
the metal end of the delay fuze is exposed in the
interior of the handle. Insert a detonator into the
open end of the delay fuze. The head and the handle
are screwed together again.
41
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.