Skip to content
WW2 Information

Searchsoon

German Infantry Weapons (Special Series) (1943), p. 74

Page 74 of 203 in German Infantry Weapons (Special Series)

Transcription

MACHINE GUNS AND MORTARS spring-actuated catch is assembled to the safety lever. This catch engages in notches cut in the receiver at the "S" (sicher--"safe") and "E"' (Feuer-"fire") posi- tions and holds the safety in the position where it is set. This gun cannot be cocked with the safety lever Operating handle ~, Base used for AA mount or bipod mount in rear By1 - position Belt tab Loaded belt (feeding from left side) Figure 39.-Sketch showing method of inserting loaded belt in feedway of M.G. 34. in the "safe" position, that is, when the letter "S" is exposed. When the letter "I" is exposed, the gun is ready to fire. (2) To load and fire.-(a) Using belt from belt box.-Insert the tab of the belt (see fig. 39), with the open ends of the links down, in the feedway on the left side of the receiver (if you have no tab on the belt, 61

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 74. Only this page is downloaded. Open the full PDF

German Infantry Weapons (Special Series), PDF page 74

100%

Photograph on this page

Cropped from the scan above, which remains the authority. Select one to enlarge or download it.

Photograph: German Infantry Weapons (Special Series), German Infantry Weapons (Special Series) (1943) p. 74
German Infantry Weapons (Special Series) (1943), p. 74. Download image

Photograph: German Infantry Weapons (Special Series), German Infantry Weapons (Special Series) (1943) p. 74