Transcription
MACHINE GUNS AND MORTARS
the safety lever to be sure that it is in the "fire"
position, that is, with the letter "F" exposed.
(b) For semi-automatic fire.-Check the sights to
see that both the front and rear sights are in position.
Press the top part of the double trigger which is
marked "E" (Einzelschussfeuer- 'single-shot fire").
(c) For full-automatic fire.-Press the bottom part
of the double trigger which is marked "D" (Dauer-
feuer-"continuous fire"). The assistant should hold
down the bipod legs, as this gun, in full-automatic
fire, has a marked tendency to jump.
(d) Using 50-round belt from drum.-Press the
catch on the sliding lever of the drum, and move the
cover to the open position so that the tab end of the
belt can be pulled from the drum. Insert the tab in
the feedway, with the open end of the links down.
Engage the hook which is on the front (narrow) end
of the drum onto the lug on the front end of the feed-
plate lower assembly. Turn the rear end of the drum
toward the gun until the spring catch on the drum en-
gages the lug on the rear end of the feedway. Now
proceed as in belt loading from a belt box (see
d(2)(a), p. 61, above).
(e) Using 75-round double drum.-If this type of
drum (fig. 40) is found with the gun, more than
likely the gun will be set up to take these drums with-
out any changes, that is, with a special feed-cover (see
fig. 41). This special feed-cover has an opening to
take the 75-round drum, and it also has a folding dust
cover to protect the breech mechanism when the drum
is not in place on the gun. No belt is used in this type
63
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.