Skip to content
WW2 Information

Searchsoon

German Infantry Weapons (Special Series) (1943), p. 78

Page 78 of 203 in German Infantry Weapons (Special Series)

Transcription

MACHINE GUNS AND MORTARS In indirect fire the shutter is usually turned to indirekt ("indirect"), thus covering the elevation drum and bringing into position an index for reading the elevation micrometer. The required elevation is Rear sight leaf Thumb nut for raising . l 'o "o~ or lowering sight qqo Figure 42.-Rear sight of M.G. 34, showing relation between yards and meters. then set, in mils, on the elevation scale and elevation micrometer. ° A collimator (see fig. 44) is provided for use in establishing the safety point of minimum eleva- DElevation in mnils is read on the elevation scale (coarse, 100-mil divi- sions) and elevation micrometer (fine, 1-mil divisions). The 300-mil setting corresponds to 0 elevation. The elevation scale graduations read from 0 to 10 (0 to 1,000 mils) for actual elevations of from minus 300 to plus 700 mils. 65

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 78. Only this page is downloaded. Open the full PDF

German Infantry Weapons (Special Series), PDF page 78

100%

Data on this page

10 data points

AttributeValue
German M.G. 34 telescopic sight elevation scale
coarse graduation division100 mils“elevation scale (coarse, 100-mil divi”
German M.G. 34 telescopic sight elevation micrometer
fine graduation division1 mil“elevation micrometer (fine, 1-mil divisions)”
German M.G. 34 telescopic sight
elevation setting for zero elevation300 mils“The 300-mil setting corresponds to 0 elevation”
actual elevation rangeminus 300 to plus 700“for actual elevations of from minus 300 to plus 700 mils”
German M.G. 34 telescopic sight elevation scale
scale graduations0-1,000 mils“The elevation scale graduations read from 0 to 10 (0 to 1,000 mils)”
M.G. 34 machine gun
elevation scale coarse division (indirect fire)100 mils“(coarse, 100-mil divi-”
elevation micrometer fine division1 mil“elevation micrometer (fine, 1-mil divisions).”
elevation setting corresponding to 0 elevation300 mils“The 300-mil setting”
elevation scale graduations (full scale)0 to 1000 mils“10 (0 to 1,000 mils) for actual elevations of from minus 300 to plus 700 mils.”
actual elevations rangeminus 300 to plus 700“10 (0 to 1,000 mils) for actual elevations of from minus 300 to plus 700 mils.”

Extracted from this page by machine. Each row quotes the text it came from; check it against the scan.