Skip to content
WW2 Information

Searchsoon

German Infantry Weapons (Special Series) (1943), p. 82

Page 82 of 203 in German Infantry Weapons (Special Series)

Transcription

MACHINE GUNS AND MORTARS 69 If the bolt pulls the base off a cartridge case in ex- tracting it, and then jams a new round into that part of the empty case remaining in the chamber, first re- move the new round and change the barrel. When time permits, extract the cartridge-case remnant from the barrel, using the extractor for ruptured cartridges which may be found in the M.G. 34 tool kit. (b) Stoppages.-The following chart may be helpful in curing stoppages: Symptom 1. The cartridge does not center the feedway. The barrel is free; the bolt is in order and in the proper for- ward position. (When beltfeed is used) Cau~seRemedy a. The cartridge is too far back in the belt (belt improperly filled; belt link bent or too wide). b. The belt-feed (lever) is worn. c. The spring of the belt-feed lever or spring of the com- pressing lever is broken. d. The feed-plate lower assembly is broken. a. Draw back the lock, open the cover, and push the cartridge into the proper posi- tion in the link of the belt. b. Load and try to fire again. If the gun does not fire, replace the worn belt-feed lever. c. Put in a new spring. d. Put in a new feed- plate lower assembly. 524652--43-6

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 82. Only this page is downloaded. Open the full PDF

German Infantry Weapons (Special Series), PDF page 82

100%