Transcription
MACHINE GUNS AND MORTARS
(5) Separate antiaircraft rear sight hinged on the right sight
base.
(6) Bolt of a different pattern from that of the M2I.G. 34,
the body being round and having a separate bolt head of a
nonrotating type.
(7) Single trigger. (The trigger mechanism is not equipped
with two triggers as in the M.G. 34, and the gun cannot fire
semi-automatically.)
c. Characteristics
(1) Gcneral.-The M.G. 42 is a combination short-
recoil blowback weapon. Instead of the rotating
bolt action of the M.G. 34,12 the bolt is locked to
the barrel by means of two movable locking studs,
located in the bolt head, and operating on two locking
cams on the barrel extension. These locking studs
resemble a wheelbarrow wheel and axle, and are placed
symmetrically in slots in the sides of the bolt head with
their axles vertical. The edges of the wheels are in
contact with the operating surfaces of the locking camns
in the barrel extension. As the bolt closes, the locking
cams force the locking wheels outward, so that their
axles, which project above and below the slots, enter
the corresponding slots in the barrel extension. The
barrel is then locked to the bolt head. On firing, the
barrel extension and the bolt recoil together a half inch,
and then the locking cams serve to unlock the locking
wheels from the barrel extension, while the blowback
pressure from the barrel drives the bolt to the rear,
operating the weapon. This system gives a high rate
21 See note 7, p. 58, above.
524652°-43 7
85
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.