Skip to content
WW2 Information

Searchsoon

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data (1941), p. 124

Page 124 of 363 in FM 101-10

Transcription

TROOP MOVEMENTS 50-51-52 NOTES This chart applies to motor movements in which vehicles keep closed up to safe driving distances. Prom 10 miles per hour to 35 miles per hour the safe driving distance varies directly -with the speed, and the time-length of a column is therefore con stant. At 5 miles per hour or less the safe driving distance is assumed to be constant (14% yards, center to center, for cars or trucks up to 3-ton) and the time-length of a column therefore varies inversely with the speed. Chart shows average time-length. Actual time-length may vary 25% either way, de pending on conditions. To use chart: Determine the number of motor vehicles in column, disregarding trailers or towed weapons. Locate this figure in vertical scale on left of chart. Follow horizontal line to right to intersection with diagonal line indicating the proper rate of travel. From this intersection follow vertical line down to horizontal scale. Read on horizontal scale the average time-length of the column. 6. Open column.—Time length of a motor movement in open column may be obtained by the following formula: Number of motor vehicles in column ———————-—————————————————=Time length (inhours). Density (vehicles per mile) x speed (mph) • 51. SHUTTLE MOVEMENTS.—a. Definition.—Troop movement by shut tling is a movement by motor in which all or a portion of the trucks make successive trips in moving both cargoes and troops. b. Time formula.— The following formula is useful for determining the total time of movement of a unit in shuttling: 3 X distance in miles Hours required = —————————————. -f- T Speed in miles per hour The figure "3" indicates the number of trips for each shuttle; for example, one trip to move foot troops, a return trip, and a third with or ganic cargo. T" (a variable), represents the number of hours consumed in un loading and loading personnel and equipment, in turn-arounds at forward and rear assembly areas, and in closing the column into its area of destina tion. When two routes are available for the movement a value of 3 may be assumed for "T" with a reasonable factor of safety. When more than two routes are available the value of "T" may be reduced. Speed in miles per hour represents the average speed of the vehicles in the movement. • 52. MARCH GRAPHS AND MARCH TABLES.—a. The field order for a march may be accompanied by a march table, particularly when the details of the march are not subject to change and can be foreseen. The march table affords a convenient means of transmitting to subordinates the many de tails pertaining to the march, the inclusion of which in the body of the field order would tend to complicate or make it unduly lengthy. 119

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 124. Only this page is downloaded. Open the full PDF

FM 101-10 Staff Officers Field Manual Organization Technical Logistical Data, PDF page 124

100%

Data on this page

5 data points

AttributeValue
US motor column, close column
safe driving distance center to center (cars/trucks up to 3-ton) at speeds up to 5 mph14 yards“(14% yards, center to center, for cars or trucks up to 3-ton)”
speed at or below which safe driving distance is constant5 miles per hour“At 5 miles per hour or less”
actual time length variability25 percent either way“Actual time-length may vary 25% either way”
US shuttle movement
turnaround time T assumed with two routes3 hours“When two routes are available for the movement a value of 3 may”
trips per shuttle cycle3 trips“The figure "3" indicates the number of trips for each shuttle”

Extracted from this page by machine. Each row quotes the text it came from; check it against the scan.