Transcription
GERMAN INFANTRY WEAPONS
Auxiliary -__-____.. ___--_ Antiaircraft ring sight, kept in the
maintenance kit, and fitting on
the barrel jacket. (This is used
in conjunction with the folding
antiaircraft rear peep sight at-
tached to the rear sight base.)
d. How to Operate
(1) Safety.-There is a plunger-type safety catch
located just above the pistol grip. Unlike the M.G. 34
safety, it works from side to side. The safety catch
cannot be operated unless the gun is cocked. To put
the gun on "safe," push the safety catch toward the
left (facing the muzzle), until the letter "S" (sicher-
"safe") shows on its surface. To put the gun on
"fire," push the safety catch toward the right until the
letter " F " (Feuer-"fire") is exposed.
(2) To load and fire.--(a) Using belt from belt
box.-Insert the tab of the belt, with the open end of
the links down, in the feedway on the left side of the
receiver (if there is no tab on the belt, take two car-
tridges from the end of the belt and use the empty
links as a tab). The feed cover may be either open or
closed during this operation. Pull the belt through
until the first round can be engaged by the feed pawls
(a three-cartridge width). The cartridges in the belt
should not be pulled so far as to cover the feed opening
in the feed-plate lower assembly. Do not cock the gun
until ready to fire. When ready to fire, cock by pull-
ing the operating handle to the rear as far as it will
go. The handle should then be shoved forward again
until a "click" is heard. This will prevent a misfire,
88
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.