Transcription
MACHINE GUNS AND MORTARS
since the recoil (return) spring is not powerful enough
to close the bolt and at the same time to shove the
operating handle forward. The safety can be put on
"safe" only when the gun is cocked. To fire, move the
safety to "fire," and press the single trigger.'" There
is no double trigger (to give provision for semiauto-
matic fire) as in the M.G. 34.
(b) Using 50-round belt from drum.-Press the
catch on the sliding cover of the drum, and move the
cover to the open position so that the tab end of the
belt can be pulled from the drum. Insert the tab in
the feedway, with the open end of the links down.
Engage the hook which is on the front (narrow) end
of the drum onto the lug on the front end of the feed-
plate lower assembly.
Turn the rear end of the drum toward the gun
until the spring catch on the rear end of the drum en-
gages the lug on the rear end of the feedway. Now
proceed as in belt-loading from a belt box (see d (2),
on the opposite page).
(c) Using 75-round double drum (if furnished with
gun).-If this type of drum is found with the gun,
more than likely the gun will be fitted to take these
drums without any changes, that is, with a special
feed cover. This special feed cover has an opening
to take the 75-round drum, and it also has a folding
dust cover to protect the breech mechanism when the
drum is not in place on the gun. No belt is used in
1 See fig. 5, p. 8, above, for the method of aligning German sights.
See par. 12d (3) (b), p. 64, above, for a description of the telescopic sight
which may also be used with the M.G. .~2.
89
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.