Transcription
M:ACHINE GUNS AND MORTARS
Remove the belt from the gun. After checking to be
sure that the chamber is empty, close the feed cover,
move the safety lever to the "fire" position, and ease
the bolt forward by holding the operating handle and
squeezing the trigger.
To unload when using the 75-round double drum,
proceed as in unloading with the belt or belt drum, ex-
cept that the double drum must be removed before the
feed cover is opened.
(4) To change barrels.-(a) General.-The barrel
on this gun should be changed after firing 250 rounds
in full-automatic fire, or, in cases of emergency, after
firing 400 rounds. Spare barrels are regular equip-
ment with the M.G. 42 and are carried in either
single- or double-barreled containers by the gun crew.
The single-barreled container opens up so that the hot
barrel can be laid on it and exposed to the air to facili-
tate cooling.
(b) Procedure.--Cock the gun and set the safety
catch to the "safe" position. Push the barrel-change
lever forward, and rotate the rear end to the right and
forward (see fig. 51). This will bring the rear end
of the barrel clear of the barrel jacket, and it can be
withdrawn by grasping it with the asbestos hand pad
furnished with maintenance kit. Place the cool barrel
in the loop of the barrel-change lever, and seat the
muzzle of the barrel in the front end of the barrel jacket;
then swing the barrel-change lever toward the barrel
jacket until it locks in place. Set the safety catch to
"fire" and recommence firing.
91
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.