Transcription
GERMAN INFANTRY WEAPONS
this type of drum. Place the drum in position, strad-
dling the feed opening and thereby depressing the
dust cover. Pull the operating handle to the rear and
then push it forward, thus charging the gun and
placing the operating handle in a position where it
will not fly forward when the trigger is squeezed. Use
the trigger for semi- or full-automatic fire in the same
manner as in firing belted ammunition from a belt box
or drum.
(d) Immediate action.-If the gun fails to fire, pull
the operating handle to the rear and return it to its
forward position. Then pull the trigger. About the
only types of stoppage that will occur in the M.G. 42
are caused as follows: (1) by empty cases jamming in
the catch between the bolt and the operating handle, or
(2) by empty cases jamming between the bolt head
and the barrel extension. To clear the first type of
stoppage, the bolt must be drawn back a little by pull-
ing back on the operating handle, holding the bolt level
with the feed-arm roller, and moving the operating
handle back and forth. To clear the second type of
stoppage, merely hold the bolt back and shake the
gun several times. This stoppage cannot be cleared
by pushing in the end of the bolt or by using a stick
or other object to remove the jammed case.
(3) To unload.-To unload (using the belt drum or
belt), cock the gun by pulling the operating handle to
the rear, and set the safety lever to the "safe" posi-
tion. Raise the feed cover by pushing forward the
feed-cover catch (at the rear end of the feed cover).
90
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.