Transcription
MACHINE GUNS AND MORTARS
e. Ammunition
The same type of ammunition may be used in both
the M.G. 42 and the M.G. 34. (See par. 12e, p. 78, above.)
f. Maintenance
(1) Oiling and cleaning.-Like the M.G. 34, the
M.G. 42 is sensitive to dust, dirt, and sand. To func-
tion well, this weapon must be kept cleaned and oiled
at all times. The ejection port should be kept closed
whenever the gun is not actually firing. The ejection-
port cover will open automatically whenever the trig-
ger is pulled back. The tracks on which the bolt slides
should be oiled carefully. The bolt head and bolt
parts should be oiled lightly. Otherwise, normal care,
such as given U. S. automatic weapons, will suffice.
(2) Stripping.-(a) To remove bipod.-Compress
the spring catch on the bipod. Rotate the bipod for-
ward, and remove it from the gun.
(b) Feed cover and feed block.-Release the feed-
cover catch (located at the back end of the feed cover)
by pushing it forward. Raise the feed cover to a 45-
degree angle (halfway). The feed-cover hinge pin
may now be removed, and the feed-cover assembly
removed from the gun. To remove the feed mecha-
nism, push back the spring-loaded cover over the pawls
to the rear. At the same time, compress the spring
clip on the feed arm and lift out the feed mechanism.
(c) Shoulder stock.--Press the catch located on the
underside of the plastic shoulder stock. Give the
93
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.