Transcription
MACHINE GUNS AND MORTARS
(d) Push in the hinge pin and raise the range
indicator.
(e) If time permits, loosen the ground on which
the base plate is placed.
(f) Place the mortar in position, and lay it roughly
on the target by moving the base plate and by using
the white line on the barrel. Bed the base plate into
the ground by pressing down on the barrel-plate
handles so that the base plate will slope slightly in
the direction of the target.
(4) Leveling.-The mortar is leveled by means of
the two leveling handles situated on each side of the
base plate and connected by a cross bar. A leveling
bubble is mounted on the traversing bracket on the
left side of the barrel socket.
To center the bubble: (a) to move the bubble toward
the firer, turn both handles to the right; (b) to move
the bubble toward the target, turn both handles to the
left; (c) to move the bubble to the right, turn both
handles inward; (d) to move the bubble to the left,
turn both handles outward.
(5) Elevation.-Range is shown on an arc fixed on
the left side of the barrel by the rear edge of an indi-
cator hinged on the traversing bracket. The are is
graduated from 60 to 520 meters (65.4 to 568.8
yards), and the indicator can be folded down when
the mortar is dismantled.
A rough adjustment of elevation can be effected in
the following manner: pressing a quick-release lever
unlocks the catch of the sliding collar connected to the
upper end of the elevating screw pillar; the collar is
99
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.