Transcription
132 GERMAN INFANTRY WEAPONS
Ofn D ust cover
Breech-mechanism lever Rack pinion
Actuating shaft
tanng pin Sliding block
Firing plunger [11
Safe-and-fire lever block
Safety plunger SFngprin
Recocking shaft Cap
Figure 69.-Breechblock of 5-cm Pak.
(The breechblock is of the horizontal sliding-block type arranged for semi-
automatic working. The firing shaft is in two parts. The front has a toe
piece engaging the safety plunger, which, when the breech is properly
closed, is clear of the toe piece, allowing the plunger to drop into a recess
in the breech ring. The rear has a projection which engages the firing
plunger. When the breech is closed, the firing shaft holds the firing pin in
the cocked position. The recocking shaft has a safe-and-fire lever incor-
porated which can be operated independently. A recocking lever on the left
engages a cam on the cradle during recoil; the right end of the shaft engages
the firing pin and, rotating during recoil, it forces the firing pin to the rear.
When the safe-and-fire lever is set to sichcr ("safe"), the recocking shaft is
moved so that a projection on it retains the firing pin in the cocked position,
preventing it from moving forwards. At Fcuer ("fire"), the projection is
cleared, and allows the front shoulder on the firing pin to engage the firing
shaft, ready to fire. The actuating shaft receives the breech mechanism
lever at the top, and the crank below. The rack pinion is mounted cen-
trally on it. The crank is fitted with a sliding block which engages a radial
groove in the breechblock. The rack pinion engages the rack in the spring
case when operated by hand or semi-automatically. The firing pin has a
shoulder at the front and a lug at the rear to engage the firing and actuating
shafts, and is held in position by a spring. The firing phlunger, in the lug on
the front lower end of the breech ring, engages the firing shaft when firing.
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.