Transcription
GERMAN INFANTRY WEAPONS
(c) Recuperator.-The recuperator is hydropneu-
matic. The hydropneumatic and recuperator cylin-
ders are situated one above the other in the cradle.
The recuperator piston rod is fixed to the gun lug.
(2) A s s e m b l y.-Assemble the breech-mechanism
spring case to the breech ring (fig. 70). Insert the
safety plunger in the breechblock. Insert the firing
and recocking shafts, securing them by the retaining
pin. Fit the crank to the breechblock and place the
breechblock in the breech ring.
Assemble the pinion on the actuating shaft with the
dust cap and breech-mechanism lever. Fit them to the
breechblock, with the pinion engaging the assembling
line on the rack, and the key on the actuating shaft
in line with the keyway on the breechblock. Place the
striker, spring, and cap in the breechblock.
I _( _~ Barrel Breech-mechanism spring case
Breech ring-
Gu~de~ Locki ng collar l.
Figure 70.-Barrel and breech of 5-cm Pak.
(The barrel is of monobloc, loose barrel construction and is fitted with
a muzzle brake. The breech ring is rectangular andt is secured to the barrel
by a locking collar. A clinometer plane is providled. The recuperator sys-
tem is attached uiderneath the breech rinig by a letlac(hable lig. The extr;ce-
tors are fitted to, and kept in position, by, an extractor releasing lever which
pa ;sses through the breech ri ng. )
134
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.