Transcription
PISTOLS, RIFLES, AND GRENADES
is made to be fixed to the rifle in a manner similar to
that of U. S. service bayonets.
(2) Grenade launchers and sights.-Both types are
illustrated in figure 13. (See also figs. 14, 16, and 18.)
The grenade launcher at the top of figure 13 is used with
the spigot-type, hollow-charge rifle grenade (Schuss-
G.P. 40); this grenade launcher is fitted to the bayonet
lug, and the grenade slips over the cylindrical part of
the launcher.
The grenade launcher shown in the lower right-
hand corner of figure 13 is used to fire the high-ex-
plosive rifle grenade (G. Sprgr.) and the armor-pierc-
ing rifle grenade (G. Pzgr.). These two grenades are
inserted with a twisting motion into the cup section of
the launcher. (See fig. 15.)
There are two types of sights which are used with
the grenade launchers. These are illustrated in figure
13. The sight is a simple attachment clamping to
the left-hand side of the rifle behind the rear sight.
The sight is composed of a sighting device placed on
a base which revolves about an axis and is leveled by
a small spirit bubble. There are two range scales
reading from 0 to 250 meters for low-angle fire and
from 250 to 50 meters for high-angle fire. These
graduations apply to the high-explosive grenade only.
When the armor-piercing grenade is fired, 75 meters
on the low-angle scale corresponds to a range of 100
meters, and 50 meters on the high-angle scale corre-
sponds to a range of 65 meters. (On the pistol grenade,
see figs. 16, 17, 18 (, and 20.)
27
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.