Skip to content
WW2 Information

Searchsoon

German Infantry Weapons (Special Series) (1943), p. 84

Page 84 of 203 in German Infantry Weapons (Special Series)

Transcription

MACHINE GUNS AND MORTARS Symptom 2. The cartridge is not pushed out of the belt or out of the drum. The bolt is ob- structed in its forward movement. It is caught on the car- tridge (in the belt or the drum). 3. The feed pawl does not take hold of the cartridge (in the belt or the drum), in spite of sufficient recoil and forward movement of the lock. 4. A round is not fired. The bolt is in its ex- treme forward position. In reloading, a live cartridge is ejected. Caunse f. The safety grip- spring is too weak. g. In drum feeding, the cartridge is pressed too hard against the bolt. a. The ejector is worn out or broken. b. The ejector spring is weak or broken. c. The feed pawl spring is weak or broken. a. The firing-pin spring is broken or too short b. The firing pin spring is weak or broken. c. The sear is worn or broken. d. The bolt is broken or the return spring is weak or broken. e. A deformed cartridge is in the barrel. f. The return - spring rod is jammed in its rear position. g. There are dirty or rough locking lugs. Remedy f. Change the safety grip-sp)ring. g. Put on another drum; loosen the tension on the spring in the drum. a and b. Change the bolt. c. Replace the feed pawl spring. a and b. Change the bolt and replace the firing pin (new spring). c. Replace the sear. d. Replace the bolt or return spring. e. Reload and fire again. f. Remove burrs or rough places on the receiver. g. Clean and oil the dirty parts. 71

Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.

Original scan

Loading the original scan…
Original scan, PDF page 84. Only this page is downloaded. Open the full PDF

German Infantry Weapons (Special Series), PDF page 84

100%