Transcription
GERMAN INLFANTRY WEAPONS
out of the barrel jacket. Remove the hot barrel, using
an asbestos hand pad which is furnished with the
spare-parts kit. Now level the piece and insert a cool
barrel into the barrel jacket. Turn the receiver back
to the right until the receiver catch again locks to-
gether the barrel jacket and the receiver. Set the
safety lever to the "fire" position and commence firing.
(7) Tripod mount.-(a) General.-When the M.G.
34 is employed on its tripod mount, it' is considered to
be a heavy machine gun. On this mount, overhead
and indirect fire nay be employed. (See figs. 34 and
35.)
(b) Mounting gun on tripod.-After unfolding and
erecting the mount,1° first place the rear end of the
machine gun on the mount so that the projections on
each side of the gun fit into the claws on the cradre
(see fig. 34); then lower the muzzle end of the gun
onto the cradle. The front part of the gun is secured
by means of the hinge clamp.
(c) Elevation and traverse.-The elevating hand-
wheel is on the left of the elevating gear (see fig. 46).
'°If the tripod mount is folded, it should be unfolded and erected as fol-
lows:
(a) Release the clamping lever on the front leg, extend the front leg to
the required position, and then lock the clamping lever.
(b) Loosen the wing nuts on the rear legs and push the rear legs back.
Raise the mount to the required height and tighten the wing nuts.
(c) With one hand, grasp the handle; with the other hand, grasp the
cradle. Push the press lever forward and raise the cradle, drawing the
elevating gear smartly back (fig. 46) until it stands erect and engages the
upper part of the mount.
(d) Adjust the legs, so that the cradle is horizontal when the elevating
gear is adjusted to its old position. The machine gun can now be mounted
on the mount.
74
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.