Transcription
MACHINE GUNS AND MORTARS
move the safety lever to the "fire" position, and ease
the bolt forward by holding the operating handle and
squeezing the trigger.
To unload when using the 75-round double drum,
proceed as in unloading with the belt or belt drum,
except that the double drum must be removed before
the feed cover is opened.
(6) To change barrels.-(a) General.-The barrels
on this gun should be changed after firing 250 rounds
near sight Operating handle Turn stock counterclockwise
fS \ ~to allow removol of hot barrel
Receiver catch Barrel Barrel extension
Figure 45.-Removal of barrel of M.G. 34
in full-automatic fire, or, in cases of emergency, after
firing 400 rounds. Spare barrels are regular equip-
ment with the M.G. 34 and are carried in either
single- or double-barreled containers by the gun crew.
(b) Procedure.--Cock the gun and set the safety
lever to the "safe" position. Push in the receiver
catch (located just below the rear sight base on the left
side of the barrel jacket) and turn the receiver almost
a half turn in a counterclockwise direction (see fig.
45). Lower the shoulder stock until the barrel slides
73
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.