Transcription
MACHINE GUNS AND MORTARS 79
(2) To join belts.-At one end of a belt there is a
link with a small semicircular tongue (fig. 47 ( B)
and at the other end of the belt (fig. 47 0 B)
there is a link with a small rectangular hole in the
side of the curved body of the link. To join one belt
to another, the tongue on the last link of one belt is
slipped through the hole on the first link of the
second belt until the small projection on the tongue
is over the small D-shaped hole in the center of the
curved body of the link (fig. 47 ®). Now place a
round in the link and the belts will be locked together
(fig. 47 0). This can be done while the gun is firing.
(3) Types of ammulition.-
Type German Name
Patrone schweres Spitzgeschoss
(Patr. s.S.), cartridge with
heavy, pointed bullet.
Patrone mit Spitzgeschoss m7it
Stahlkern (Patr. S.m.K.),
c a r t r i d g e with steel-core
pointed bullet.
racer_- · Patrone mit Spitzgeschoss mit
Stahlkern and Leuchtspur
(Patr. S.m. K.L'Spur), car-
tridges with steel-core point-
ed bullet with tracer.
Identification
Green lacquer coloring
around the primer seat.
Red lacquer coloring
around the primer seat.
Ried lacquer coloring
around the primer seat,
and black tip on the
bullet.
Ammunition is usually packed 1,500 rounds to a case.
A case weighs about 113 pounds. Ammunition cartons
holding 5-round clips have their identification labels
overprinted with I.L. in red ink. Ammunition is not
packed in belts; it is loaded into the nondisintegrating
Ball
AP t
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.