Transcription
GERMAN INFANTRY WEAPONS
metallic link belts with the aid of a belt-loading machine.
These belts are not expendable.
(4) Hand-loading belt.-When there is no belt-load-
ing machine available, the belts may be loaded by hand.
Insert rounds in the belt from the end with the projec-
tion until the cannelure of the cartridge case is stopped
by the tit on the end of the projection. This will cor-
rectly place the round in the belt. Belts are connected
as stated in e (2), p. 79, above.
(5) Lubrication of belt.-The belts should be lubri-
cated with heavy oil if the cartridges are kept in them
for any purpose other than immediate use. One appli-
cation of heavy oil will last for 10 usings of the belt
in the gun.
f. Maintenance
(1) Oiling and cleaning.-The M.G. 34 is sensitive
to dirt, dust, and sand. To function well, it must be
kept cleaned and oiled at all times. The ejection-port
cover should be kept closed whenever the gun is not
firing. This ejection-port cover will automatically
open whenever either of the double triggers is pulled.
The belts should be kept oiled. The same type of
care and cleaning given to similar U. S. weapons will
suffice.
(2) .Stripping.-(a) To remove bipod.-Raise the
front sight. Press the leaf spring catch of the
bipod (located underneath the barrel jacket behind
the bipod guide). Rotate the bipod until it is on top
of the barrel, and then remove it from the gun.
(b) Feed cover and feed block.-Release the feed-
cover catch (at the back end of the feed cover) by
80
Uncorrected OCR text. Columns and tables may be out of order; the scan is the authority.